Quick Answer: What size motor do I need for a 14 foot boat?

How big of a motor can you put on a 14ft boat?

12 foot – 10 – 15 hp motor. 14 foot -15 hp motor. 16 foot – 15 – 20 hp motor. 18 foot – 18 – 20 hp motor.

What size motor is needed for a 14 foot aluminum boat?

For lighter boats, a motor that produces 8-10 horsepower can get the job done quite easily. But if you’ve got a heavier boat, a 20-horsepower motor will get most any tinnie moving quickly.

How do I know what size motor for my boat?

The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.

INTERESTING:  How do you know if your engine is flooded?

Can you put a 15 hp motor on a 12 foot jon boat?

A 15hp on a 12′ boat may porpoise, or (worse) cause the bow to dig in as the hull is sucked downwards from excess speed. (Yes, this happens). If you DO go with this size engine, avoid running it at WOT unless you have some extra weight in the boat.

Is a 14 ft boat too small?

A 14 ft boat is good for 2 or 3 hunters, decoys and such on water that doesn’t get real rough. Make sure you have adequate motor for the job. 3 guys would require a 25 hp. 2 would probably plane with a 9.9 or 15 hp.

How fast will a 2.5 hp outboard go?

It’s easy to handle and has convenient grab points for lifting. Yamaha F2. 5 Four-Stroke ($940; www.yamaha-motor.com) power: 2.5 hp weight: 38 pounds top speed: 5.4 mph noise at full throttle: 87 dB-A.

What size motor do I need for a 16 foot aluminum boat?

An aluminum boat that is 16 feet long needs to have a 60 horsepower motor. Once equipped, it can have a speed of 25 to 30 miles per hour.

How fast does a 10 hp motor go?

Note: Many factors can affect the real-world performance of the 10 HP outboard motor, including the boat type, load, weather, battery type and capacity. That’s to say, with one single charge, you can go over 40 miles at 5 mph speed.

What size outboard do I need for a 15 foot boat?

What Size Outboard Do I Need For A 15 Foot Boat? You should find one to match your budget for a boat that is about 10-15 feet long. These lightweight boats won’t be quite as powerful as larger cars so they’ll have an engine about 15 horsepower in the range of 20-30 horsepower.

INTERESTING:  You asked: Do brushed motors have any advantages?

How big of a motor can you put on a 12 foot boat?

For example, a twelve-foot boat with a four-foot transom width translates into a maximum engine size of fifteen horsepower.

How fast is 60 horsepower?

16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.

Are 4 stroke boat motors better than 2 stroke?

4-Stroke Outboards Pros

The fuel efficiency of a 4-stroke motor can be 50% better than that of a 2-stroke motor with the same HP. As for environmental concerns, 4 stroke outboards produce far less harmful emissions, which can be as much as 90% cleaner than those from a similar sized 2-stroke motor.

Will a trolling motor push a jon boat up river?

Yes, a trolling motor can push a jon boat upriver if it is strong enough for the current and the weight of the boat.

How do you increase the weight capacity of a jon boat?

Ways to Add Buoyancy to a Jon Boat

  1. Add flotation pods. …
  2. Move some of the heavier items to the front. …
  3. Add PVC tubes. …
  4. Built-in air cavities for buoyancy. …
  5. Adding buoyancy using foam.

What is the smallest outboard motor?

SMALLEST MOTOR TO EVER CROSS THE ATLANTIC: 2.5HP TOHATSU BRINGS SEIKO NAKAJIMA SAFELY TO NEW YORK. On April 30, 1995, Seiko Nakajima, his 21ft boat and a 2.5hp Tohatsu outboard motor arrived at the historic South Street Seaport in New York City, concluding an eight-month voyage.